File: //.log.junior/logs.tar.22
var/log/ 0000755 0000000 0000000 00000000000 14751277510 011136 5 ustar root root var/log/sn-result.log 0000644 0000000 0000000 00000000016 14751277510 013572 0 ustar root root 1990PCN844615
var/log/dmesg.log 0000644 0000000 0000000 00000125077 14751277510 012754 0 ustar root root [ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.302+ (root@build7) (gcc version 12.2.0 (GCC) ) #72806 SMP Thu Sep 5 13:42:01 CST 2024
[ 0.000000] Command line: root=/dev/md0 earlyprintk=apl console=ttyS2,115200n8 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 syno_hw_version=DS218+ vender_format_version=2 syno_hdd_detect=18,179,176,175 syno_hdd_enable=21,20,19,9 syno_usb_vbus_gpio=11@0000:00:15.0@1,10@0000:00:15.0@2,13@0000:00:15.0@3 sn=1990PCN844615 macs=001132b84c67
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000067c27fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067c28000-0x0000000067c28fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000067c29000-0x0000000067c42fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000067c43000-0x0000000067c7dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067c7e000-0x0000000068c7dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000068c7e000-0x000000007822efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007822f000-0x000000007aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d370afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x01ddc510-0x01ddc51f] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001ddc50f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001ddc510-0x0000000001ddc51f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001ddc520-0x000000000fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000012151000-0x0000000067c27fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067c28000-0x0000000067c28fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000067c29000-0x0000000067c42fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000067c43000-0x0000000067c7dfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067c7e000-0x0000000068c7dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000068c7e000-0x000000007822efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007822f000-0x000000007aebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d3709000-0x00000000d370afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001ffffffff] usable
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x7affe014 SMBIOS=0x78757000 SMBIOS 3.0=0x78755000
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] e820: update [mem 0x7b000000-0xffffffff] usable ==> reserved
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff88000007a000] 7a000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x37558000-0x37aa3fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007AFFE014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x000000007AFDA188 0000DC (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000007AFF5000 000114 (v06 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000007AFE6000 00772B (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000007AFAF000 000040
[ 0.000000] ACPI: FACS 0x000000007AFAF000 000040
[ 0.000000] ACPI: UEFI 0x000000007AFFD000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: BDAT 0x000000007AFFB000 000030 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000007AFFA000 000042 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFF9000 000554 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x000000007AFF8000 000034 (v03 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: PSDS 0x000000007AFF7000 00004D (v01 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000007AFF4000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000007AFF3000 00005C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000007AFF2000 000084 (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000007AFF1000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: NPKT 0x000000007AFF0000 000065 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x000000007AFEF000 000047 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WSMT 0x000000007AFEE000 000028 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE4000 00024A (v02 INSYDE UsbCTabl 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE3000 0000BC (v01 INSYDE Platform 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE2000 000541 (v02 INSYDE Cpu0Ist 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE1000 00072B (v02 INSYDE CpuSsdt 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFDE000 002760 (v02 INSYDE SaSsdt 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000007AFDD000 000034 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000007AFF6000 000104 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000007AFE5000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: NHLT 0x000000007AFDC000 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000085fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000012151000-0x0000000067c27fff]
[ 0.000000] node 0: [mem 0x0000000067c43000-0x0000000067c7dfff]
[ 0.000000] node 0: [mem 0x0000000068c7e000-0x000000007822efff]
[ 0.000000] node 0: [mem 0x000000007afff000-0x000000007affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ffffffff]
[ 0.000000] On node 0 totalpages: 1527880
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3972 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7428 pages used for memmap
[ 0.000000] DMA32 zone: 475332 pages, LIFO batch:31
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x01ddc000-0x01ddcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x01ddc000-0x01ddcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67c28000-0x67c28fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67c29000-0x67c42fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67c7e000-0x68c7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7822f000-0x7aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7aebf000-0x7afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7afbf000-0x7affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xd3708fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd3709000-0xd370afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd370b000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xd3708fff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 37 pages/cpu @ffff8801ffc00000 s111576 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s111576 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1503981
[ 0.000000] Kernel command line: root=/dev/md0 earlyprintk=apl console=ttyS2,115200n8 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 syno_hw_version=DS218+ vender_format_version=2 syno_hdd_detect=18,179,176,175 syno_hdd_enable=21,20,19,9 syno_usb_vbus_gpio=11@0000:00:15.0@1,10@0000:00:15.0@2,13@0000:00:15.0@3 sn=1990PCN844615 macs=001132b84c67
[ 0.000000] Internal HD num: 2
[ 0.000000] Internal netif num: 1
[ 0.000000] Support HDD Hotplug.
[ 0.000000] Sata Port Map: 21
[ 0.000000] Synology Hardware Version: DS218+
[ 0.000000] Vender format version: 2
[ 0.000000] SYNO GPIO hdd detect pin: 18 179 176 175
[ 0.000000] SYNO GPIO hdd enable pin: 21 20 19 9
[ 0.000000] USB Vbus GPIO Control:
[ 0.000000] Gpp#11 - Host: 0000:00:15.0 - Port:1 - Polarity: ACTIVE_HIGH
[ 0.000000] Gpp#10 - Host: 0000:00:15.0 - Port:2 - Polarity: ACTIVE_HIGH
[ 0.000000] Gpp#13 - Host: 0000:00:15.0 - Port:3 - Polarity: ACTIVE_HIGH
[ 0.000000] Serial Number: 1990PCN844615
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Memory: 5875500K/6111520K available (5719K kernel code, 866K rwdata, 1784K rodata, 924K init, 664K bss, 236020K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1996.709 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.41 BogoMIPS (lpj=1996709)
[ 0.011851] pid_max: default: 32768 minimum: 301
[ 0.017007] ACPI: Core revision 20150930
[ 0.031734] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.041380] Security Framework initialized
[ 0.045799] AppArmor: AppArmor initialized
[ 0.050366] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.058031] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.066475] Initializing cgroup subsys io
[ 0.070789] Initializing cgroup subsys memory
[ 0.075646] Initializing cgroup subsys devices
[ 0.080594] Initializing cgroup subsys freezer
[ 0.085592] CPU: Physical Processor ID: 0
[ 0.090015] CPU: Processor Core ID: 0
[ 0.106140] CPU0: Thermal monitoring enabled (TM1)
[ 0.111362] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.117336] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.126533] Freeing SMP alternatives memory: 24K
[ 0.138313] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.154842] TSC deadline timer enabled
[ 0.154851] smpboot: CPU0: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[ 0.165657] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.176902] ... version: 4
[ 0.181368] ... bit width: 48
[ 0.185932] ... generic registers: 4
[ 0.190399] ... value mask: 0000ffffffffffff
[ 0.196323] ... max period: 00007fffffffffff
[ 0.202245] ... fixed-purpose events: 3
[ 0.206712] ... event mask: 000000070000000f
[ 0.213195] x86: Booting SMP configuration:
[ 0.217677] .... node #0, CPUs: #1
[ 0.235868] x86: Booted up 1 node, 2 CPUs
[ 0.240344] smpboot: Total of 2 processors activated (7986.83 BogoMIPS)
[ 0.248574] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.257725] devtmpfs: initialized
[ 0.261510] PM: Registering ACPI NVS region [mem 0x67c28000-0x67c28fff] (4096 bytes)
[ 0.269965] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7afbefff] (1048576 bytes)
[ 0.278995] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.289782] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.296770] pinctrl core: initialized pinctrl subsystem
[ 0.302818] NET: Registered protocol family 16
[ 0.314633] cpuidle: using governor ladder
[ 0.323028] cpuidle: using governor menu
[ 0.327264] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.335663] ACPI: bus type PCI registered
[ 0.340224] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.350523] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.358101] PCI: Using configuration type 1 for base access
[ 0.369950] ACPI: Added _OSI(Module Device)
[ 0.374475] ACPI: Added _OSI(Processor Device)
[ 0.379384] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.384627] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.395690] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.407545] ACPI: Dynamic OEM Table Load:
[ 0.411831] ACPI: SSDT 0xFFFF8801F8B93A00 00015F (v02 PmRef ApIst 00003000 INTL 20130117)
[ 0.422247] ACPI: Interpreter enabled
[ 0.426159] ACPI: (supports S0 S4 S5)
[ 0.430221] ACPI: Using IOAPIC for interrupt routing
[ 0.435802] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.454925] ACPI: Power Resource [FN00] (on)
[ 0.460375] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.467092] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.477016] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.484603] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.493730] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.505716] PCI host bridge to bus 0000:00
[ 0.510089] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.516981] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.524555] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.532131] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.539708] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.548060] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[ 0.556412] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[ 0.564763] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.573117] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.579246] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[ 0.579600] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[ 0.579625] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.579636] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.579645] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.580006] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380
[ 0.580043] pci 0000:00:0e.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[ 0.580072] pci 0000:00:0e.0: reg 0x20: [mem 0x91000000-0x910fffff 64bit]
[ 0.580122] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.580402] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.586591] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[ 0.586644] pci 0000:00:0f.0: reg 0x10: [mem 0x91318000-0x91318fff 64bit]
[ 0.586739] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.587023] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007
[ 0.587064] pci 0000:00:11.0: reg 0x10: [mem 0x91314000-0x91315fff 64bit]
[ 0.587083] pci 0000:00:11.0: reg 0x18: [mem 0x91319000-0x91319fff 64bit]
[ 0.587422] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[ 0.587448] pci 0000:00:12.0: reg 0x10: [mem 0x91316000-0x91317fff]
[ 0.587458] pci 0000:00:12.0: reg 0x14: [mem 0x9132e000-0x9132e0ff]
[ 0.587467] pci 0000:00:12.0: reg 0x18: [io 0x3080-0x3087]
[ 0.587476] pci 0000:00:12.0: reg 0x1c: [io 0x3088-0x308b]
[ 0.587485] pci 0000:00:12.0: reg 0x20: [io 0x3060-0x307f]
[ 0.587494] pci 0000:00:12.0: reg 0x24: [mem 0x9132c000-0x9132c7ff]
[ 0.587534] pci 0000:00:12.0: PME# supported from D3hot
[ 0.587799] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[ 0.587870] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.588090] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.594298] pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
[ 0.594368] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.594587] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.600797] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[ 0.600829] pci 0000:00:15.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[ 0.600891] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.601117] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.607331] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
[ 0.607361] pci 0000:00:16.0: reg 0x10: [mem 0x9131a000-0x9131afff 64bit]
[ 0.607376] pci 0000:00:16.0: reg 0x18: [mem 0x9131b000-0x9131bfff 64bit]
[ 0.607709] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
[ 0.607740] pci 0000:00:18.0: reg 0x10: [mem 0x9131c000-0x9131cfff 64bit]
[ 0.607756] pci 0000:00:18.0: reg 0x18: [mem 0x9131d000-0x9131dfff 64bit]
[ 0.608056] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000
[ 0.608090] pci 0000:00:18.1: reg 0x10: [mem 0x9131e000-0x9131efff 64bit]
[ 0.608104] pci 0000:00:18.1: reg 0x18: [mem 0x9131f000-0x9131ffff 64bit]
[ 0.608406] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000
[ 0.608438] pci 0000:00:18.2: reg 0x10: [mem 0x91320000-0x91320fff 64bit]
[ 0.608454] pci 0000:00:18.2: reg 0x18: [mem 0x91321000-0x91321fff 64bit]
[ 0.608754] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000
[ 0.608789] pci 0000:00:18.3: reg 0x10: [mem 0x91322000-0x91322fff 64bit]
[ 0.608803] pci 0000:00:18.3: reg 0x18: [mem 0x91323000-0x91323fff 64bit]
[ 0.609123] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
[ 0.609155] pci 0000:00:19.0: reg 0x10: [mem 0x91324000-0x91324fff 64bit]
[ 0.609170] pci 0000:00:19.0: reg 0x18: [mem 0x91325000-0x91325fff 64bit]
[ 0.609483] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
[ 0.609521] pci 0000:00:19.1: reg 0x10: [mem 0x91326000-0x91326fff 64bit]
[ 0.609534] pci 0000:00:19.1: reg 0x18: [mem 0x91327000-0x91327fff 64bit]
[ 0.609842] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
[ 0.609875] pci 0000:00:19.2: reg 0x10: [mem 0x91328000-0x91328fff 64bit]
[ 0.609889] pci 0000:00:19.2: reg 0x18: [mem 0x91329000-0x91329fff 64bit]
[ 0.610211] pci 0000:00:1a.0: [8086:5ac8] type 00 class 0x0c8000
[ 0.610260] pci 0000:00:1a.0: reg 0x10: [mem 0x9132a000-0x9132afff 64bit]
[ 0.610275] pci 0000:00:1a.0: reg 0x18: [mem 0x9132b000-0x9132bfff 64bit]
[ 0.610340] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.610624] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[ 0.611009] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[ 0.611071] pci 0000:00:1f.1: reg 0x10: [mem 0x9132d000-0x9132d0ff 64bit]
[ 0.611151] pci 0000:00:1f.1: reg 0x20: [io 0x3040-0x305f]
[ 0.611566] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
[ 0.611621] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x9121ffff]
[ 0.611649] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x201f]
[ 0.611664] pci 0000:01:00.0: reg 0x1c: [mem 0x91220000-0x91223fff]
[ 0.611774] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.611834] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.619995] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.625353] pci 0000:00:13.0: bridge window [io 0x2000-0x2fff]
[ 0.625358] pci 0000:00:13.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.625423] pci 0000:02:00.0: [1b4b:9170] type 00 class 0x010601
[ 0.625452] pci 0000:02:00.0: reg 0x10: [io 0x1018-0x101f]
[ 0.625463] pci 0000:02:00.0: reg 0x14: [io 0x1024-0x1027]
[ 0.625473] pci 0000:02:00.0: reg 0x18: [io 0x1010-0x1017]
[ 0.625484] pci 0000:02:00.0: reg 0x1c: [io 0x1020-0x1023]
[ 0.625494] pci 0000:02:00.0: reg 0x20: [io 0x1000-0x100f]
[ 0.625505] pci 0000:02:00.0: reg 0x24: [mem 0x91100000-0x911001ff]
[ 0.625515] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.625553] pci 0000:02:00.0: PME# supported from D3hot
[ 0.625588] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.633737] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.639092] pci 0000:00:14.0: bridge window [io 0x1000-0x1fff]
[ 0.639098] pci 0000:00:14.0: bridge window [mem 0x91100000-0x911fffff]
[ 0.639114] pci_bus 0000:00: on NUMA node 0
[ 0.639640] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.648273] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.657013] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.665755] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.674494] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.683235] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.691974] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.700715] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.711020] ACPI: Enabled 3 GPEs in block 00 to 7F
[ 0.716355] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.722486] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.731533] vgaarb: loaded
[ 0.734533] vgaarb: bridge control possible 0000:00:02.0
[ 0.740554] SCSI subsystem initialized
[ 0.744695] libata version 3.00 loaded.
[ 0.744750] pps_core: LinuxPPS API ver. 1 registered
[ 0.750177] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.760391] PTP clock support registered
[ 0.764850] EFI Variables Facility v0.08 2004-May-17
[ 0.797983] pstore: Registered efi as persistent store backend
[ 0.804343] PCI: Using ACPI for IRQ routing
[ 0.815827] PCI: pci_cache_line_size set to 64 bytes
[ 0.815935] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.815938] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[ 0.815940] e820: reserve RAM buffer [mem 0x01ddc510-0x03ffffff]
[ 0.815942] e820: reserve RAM buffer [mem 0x67c28000-0x67ffffff]
[ 0.815944] e820: reserve RAM buffer [mem 0x67c7e000-0x67ffffff]
[ 0.815946] e820: reserve RAM buffer [mem 0x7822f000-0x7bffffff]
[ 0.815948] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.816217] clocksource: Switched to clocksource hpet
[ 0.830738] AppArmor: AppArmor Filesystem Enabled
[ 0.835901] pnp: PnP ACPI init
[ 0.839403] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.845843] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.852446] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.859054] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.859478] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.867089] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.874468] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.881849] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.889238] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.896613] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.903996] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.911378] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.918761] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.926143] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.926472] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.926662] pnp: PnP ACPI: found 3 devices
[ 0.937975] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.947724] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.958816] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.964328] pci 0000:00:13.0: bridge window [io 0x2000-0x2fff]
[ 0.971128] pci 0000:00:13.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.978716] pci 0000:02:00.0: BAR 6: assigned [mem 0x91110000-0x9111ffff pref]
[ 0.986764] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.992302] pci 0000:00:14.0: bridge window [io 0x1000-0x1fff]
[ 0.999104] pci 0000:00:14.0: bridge window [mem 0x91100000-0x911fffff]
[ 1.006686] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.006689] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.006691] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.006694] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.006697] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window]
[ 1.006699] pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window]
[ 1.006702] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window]
[ 1.006705] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window]
[ 1.006708] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.006710] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[ 1.006713] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.006715] pci_bus 0000:02: resource 1 [mem 0x91100000-0x911fffff]
[ 1.006754] NET: Registered protocol family 2
[ 1.011600] IP idents hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.021058] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.029209] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.036916] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.044089] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.050910] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.058293] NET: Registered protocol family 1
[ 1.063013] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.064666] pci 0000:02:00.0: Apply mv9170 specific programming steps
[ 1.071697] PCI: CLS 64 bytes, default 64
[ 1.311564] Trying to unpack rootfs image as initramfs...
[ 3.005262] decompress cpio completed and skip redundant lzma
[ 3.013029] Freeing initrd memory: 5424K
[ 3.017254] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.024435] software IO TLB: mapped [mem 0x71eb4000-0x75eb4000] (64MB)
[ 3.032470] audit: initializing netlink subsys (disabled)
[ 3.038346] audit: type=2000 audit(1738929831.493:1): initialized
[ 3.045422] Initialise system trusted keyring
[ 3.150375] VFS: Disk quotas dquot_6.6.0
[ 3.154628] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.534644] Key type asymmetric registered
[ 3.539057] Asymmetric key parser 'x509' registered
[ 3.544558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.552743] io scheduler noop registered
[ 3.557111] io scheduler deadline registered
[ 3.561948] io scheduler cfq registered (default)
[ 3.567750] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[ 3.575365] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.582644] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
[ 3.582673] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
[ 3.590413] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.597697] pcie_pme 0000:00:14.0:pcie01: service driver pcie_pme loaded
[ 4.033445] tsc: Refined TSC clocksource calibration: 1996.800 MHz
[ 4.040190] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[ 4.948786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.110949] clocksource: Switched to clocksource tsc
[ 5.177644] Linux agpgart interface v0.103
[ 5.209894] brd: module loaded
[ 5.241657] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.319900] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.383491] dw-apb-uart.1: ttyS0 at MMIO 0x9131c000 (irq = 44, base_baud = 115200) is a 16550A
[ 5.392958] console [ttyS2] enabled
[ 5.396848] bootconsole [earlyser0] disabled
[ 5.424673] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 5.426964] dw-apb-uart.2: ttyS1 at MMIO 0x9131e000 (irq = 45, base_baud = 115200) is a 16550A
[ 5.428054] console [ttyS2] disabled
[ 5.428258] dw-apb-uart.3: ttyS2 at MMIO 0x91320000 (irq = 6, base_baud = 115200) is a 16550A
[ 5.428275] console [ttyS2] enabled
[ 5.441519] dw-apb-uart.4: ttyS3 at MMIO 0x91322000 (irq = 47, base_baud = 115200) is a 16550A
[ 5.461402] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 5.478867] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 5.496835] idma64 idma64.7: Found Intel integrated DMA 64-bit
[ 5.514489] Loading iSCSI transport class v2.0-870.
[ 5.526571] ahci 0000:00:12.0: version 3.0
[ 5.526844] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.535901] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
[ 5.577473] scsi host0: ahci
[ 5.582469] scsi host1: ahci
[ 5.585815] ata1: SATA max UDMA/133 abar m2048@0x9132c000 port 0x9132c100 irq 367
[ 5.594181] ata2: SATA max UDMA/133 abar m2048@0x9132c000 port 0x9132c180 irq 367
[ 13.956817] ata1: link is slow to respond, please be patient (ready=0)
[ 18.762036] ata1: softreset failed (device not ready)
[ 18.767681] ata1: SRST fail, set srst fail flag
[ 19.389074] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 19.395986] ata1: link reset sucessfully clear error flags
[ 19.421306] ata1.00: disabling queued TRIM support
[ 19.421309] ata1.00: ATA-9: WDC WD4003FFBX-68MU3N0, 83.00A83, max UDMA/133
[ 19.428992] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 19.436963] ata1.00: SN:VBGGBSNF
[ 19.448080] ata1.00: disabling queued TRIM support
[ 19.448087] ata1.00: configured for UDMA/133
[ 19.453188] scsi 0:0:0:0: Direct-Access WDC WD4003FFBX-68MU3N0 0A83 PQ: 0 ANSI: 5
[ 19.463313] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 19.471977] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 19.482964] sd 0:0:0:0: [sda] Write Protect is off
[ 19.488336] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10
[ 19.492317] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 19.721617] sda: sda1 sda2 sda5 sda6
[ 19.726278] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.817450] ata2: link is slow to respond, please be patient (ready=0)
[ 32.622669] ata2: softreset failed (device not ready)
[ 32.628314] ata2: SRST fail, set srst fail flag
[ 33.351709] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 33.358620] ata2: link reset sucessfully clear error flags
[ 33.380858] ata2.00: disabling queued TRIM support
[ 33.380861] ata2.00: ATA-9: WDC WD4003FFBX-68MU3N0, 83.00A83, max UDMA/133
[ 33.388549] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 33.396522] ata2.00: SN:VBGGBLDF
[ 33.407655] ata2.00: disabling queued TRIM support
[ 33.407661] ata2.00: configured for UDMA/133
[ 33.412745] scsi 1:0:0:0: Direct-Access WDC WD4003FFBX-68MU3N0 0A83 PQ: 0 ANSI: 5
[ 33.422874] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 33.423109] Change defer qc mode on external port for compatibility
[ 33.423137] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 33.423140] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 33.426456] scsi host2: ahci
[ 33.426562] ata3: SATA max UDMA/133 abar m512@0x91100000 port 0x91100100 irq 368
[ 33.468113] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 33.474025] sd 1:0:0:0: [sdb] Write Protect is off
[ 33.479384] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 10
[ 33.479418] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 33.675255] sdb: sdb1 sdb2 sdb5 sdb6
[ 33.679844] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 33.733734] ata3: SATA link down (SStatus 0 SControl 300)
[ 33.739780] ata3: Disk is present for SATA link down event
[ 33.758281] rtc-s35390a i2c-RTC35390:00: rtc core: registered rtc-s35390a as rtc0
[ 33.766684] i2c /dev entries driver
[ 33.795877] i801_smbus 0000:00:1f.1: SMBus using polling
[ 33.805951] md: raid1 personality registered for level 1
[ 33.812007] NET: Registered protocol family 17
[ 33.817000] Key type dns_resolver registered
[ 33.835784] mce: Using 7 MCE banks
[ 33.841077] registered taskstats version 1
[ 33.845669] Loading compiled-in untrusted X.509 certificates
[ 33.851995] Loading compiled-in X.509 certificates
[ 33.857403] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[ 33.870104] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[ 33.881422] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[ 33.894373] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[ 33.905368] page_owner is disabled
[ 33.909233] AppArmor: AppArmor sha1 policy hashing enabled
[ 33.916092] rtc-s35390a i2c-RTC35390:00: setting system clock to 2025-02-07 03:34:24 UTC (1738899264)
[ 33.928170] Freeing unused kernel memory: 924K
[ 33.933148] Write protecting the kernel read-only data: 8192k
[ 33.939806] Freeing unused kernel memory: 416K
[ 33.945628] Freeing unused kernel memory: 264K
[ 34.091729] random: nonblocking pool is initialized
[ 34.175886] ACPI: bus type USB registered
[ 34.180415] usbcore: registered new interface driver usbfs
[ 34.186566] usbcore: registered new interface driver hub
[ 34.192524] usbcore: registered new interface driver ethub
[ 34.198666] usbcore: registered new device driver usb
[ 34.237683] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 34.244194] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 34.453597] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109010
[ 34.463035] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 34.463374] hub 1-0:1.0: USB hub found
[ 34.468806] hub 1-0:1.0: 8 ports detected
[ 34.473808] host 0000:00:15.0 port 1 has Vbus GPIO#11 with polarity ACTIVE_HIGH
[ 34.482240] host 0000:00:15.0 port 2 has Vbus GPIO#10 with polarity ACTIVE_HIGH
[ 34.490497] host 0000:00:15.0 port 3 has Vbus GPIO#13 with polarity ACTIVE_HIGH
[ 34.499229] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 34.505081] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 34.513388] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 34.522716] hub 2-0:1.0: USB hub found
[ 34.528104] hub 2-0:1.0: 7 ports detected
[ 34.533102] host 0000:00:15.0 port 1 has Vbus GPIO#11 with polarity ACTIVE_HIGH
[ 34.541544] host 0000:00:15.0 port 2 has Vbus GPIO#10 with polarity ACTIVE_HIGH
[ 34.549806] host 0000:00:15.0 port 3 has Vbus GPIO#13 with polarity ACTIVE_HIGH
[ 34.586351] apollolake_synobios: loading out-of-tree module taints kernel.
[ 34.604923] synobios open /dev/ttyS1 success
[ 34.609877] correction with 0x00
[ 34.614548] 2025-2-7 3:34:25 UTC
[ 34.618156] synobios: load, major number 201
[ 34.622929] Brand: Synology
[ 34.626047] Model: DS-218+
[ 34.629068] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 34.638511] synobios cpu_arch proc entry initialized
[ 34.644060] synobios crypto_hw proc entry initialized
[ 34.649704] synobios syno_platform proc entry initialized
[ 34.665486] Module [apollolake_synobios] is removed.
[ 34.671159] synobios: unload
[ 34.778774] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 34.861287] md: md0 stopped.
[ 34.865803] md: bind<sdb1>
[ 34.869023] md: bind<sda1>
[ 34.872272] md/raid1:md0: active with 2 out of 2 mirrors
[ 34.881962] md0: detected capacity change from 0 to 2549940224
[ 35.042829] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 36.901133] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 36.945982] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 37.021822] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 37.035168] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 37.214174] loop: module loaded
[ 41.522161] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 41.533822] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
var/log/ps-result.log 0000644 0000000 0000000 00000006431 14751277510 013603 0 ustar root root 1 root 4212 S /init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u8:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW [watchdog/0]
11 root 0 SW [watchdog/1]
12 root 0 SW [migration/1]
13 root 0 SW [ksoftirqd/1]
14 root 0 SW [kworker/1:0]
15 root 0 SW< [kworker/1:0H]
16 root 0 SW [kdevtmpfs]
17 root 0 SW< [netns]
18 root 0 SW [kworker/u8:1]
20 root 0 SW< [perf]
172 root 0 SW [khungtaskd]
173 root 0 SW< [writeback]
176 root 0 SWN [ksmd]
177 root 0 SW< [crypto]
178 root 0 SW< [kintegrityd]
179 root 0 SW< [bioset]
181 root 0 SW< [kblockd]
352 root 0 SW< [ata_sff]
363 root 0 SW< [md]
508 root 0 SW [kworker/0:1]
527 root 0 SW [kworker/1:1]
552 root 0 SW< [kswapd0:0]
615 root 0 SW< [vmstat]
731 root 0 SW [fsnotify_mark]
733 root 0 SW [kworker/u8:2]
3301 root 0 SW< [bioset]
3313 root 0 SW< [bioset]
3317 root 0 SW< [bioset]
3325 root 0 SW< [bioset]
3328 root 0 SW< [bioset]
3329 root 0 SW< [bioset]
3331 root 0 SW< [bioset]
3332 root 0 SW< [bioset]
3333 root 0 SW< [bioset]
3334 root 0 SW< [bioset]
3335 root 0 SW< [bioset]
3336 root 0 SW< [bioset]
3337 root 0 SW< [bioset]
3338 root 0 SW< [bioset]
3339 root 0 SW< [bioset]
3340 root 0 SW< [bioset]
3655 root 0 SW [kworker/0:2]
3754 root 0 SW< [iscsi_eh]
3768 root 0 SW< [nvme]
3795 root 0 SW [scsi_eh_0]
3826 root 0 SW< [scsi_tmf_0]
3831 root 0 SW [scsi_eh_1]
3834 root 0 SW< [scsi_tmf_1]
3853 root 0 SW< [bioset]
3936 root 0 SW< [kworker/0:1H]
3937 root 0 SW< [bioset]
3942 root 0 SW [scsi_eh_2]
3945 root 0 SW< [scsi_tmf_2]
4174 root 0 SW< [deferwq]
4175 root 4212 S /bin/ash /linuxrc.syno
4182 root 0 Z [ash]
4183 root 0 Z [tee]
4509 root 0 SW [kworker/1:2]
4654 root 0 SW [kworker/1:3]
4655 root 0 SW< [kworker/1:1H]
4681 root 0 SW< [bioset]
4691 root 0 SW< [bioset]
4692 root 0 SW< [bioset]
4693 root 0 SW [md0_raid1]
4721 root 0 SW [kworker/1:4]
4951 root 0 Z [linuxrc.syno.im]
4952 root 0 Z [tee]
5082 root 0 SW< [bioset]
5084 root 0 SW< [bioset]
5088 root 0 SW< [bioset]
5094 root 0 SW< [bioset]
5100 root 0 SW< [bioset]
5108 root 0 SW< [bioset]
5114 root 0 SW< [bioset]
5123 root 0 SW< [bioset]
5394 root 4212 S {backup_junior_l} /bin/sh /usr/syno/sbin/backup_juni
5428 root 0 SW< [ext4-group-desc]
5429 root 0 SW [jbd2/md0-8]
5430 root 0 SW< [ext4-rsv-conver]
5434 root 4212 R /bin/ps afx
var/log/ls-root-result.log 0000644 0000000 0000000 00000003571 14751277507 014570 0 ustar root root drwxr-xr-x 3 root root 4096 Feb 3 12:17 .log.junior
drwxr-xr-x 3 root root 4096 Feb 7 03:32 .old_patch_info
-rw------- 1 root root 1024 Feb 3 12:17 .rnd
drwxr-xr-x 4 root root 4096 Nov 6 20:23 .syno
drwxr-xr-x 2 root root 4096 Jun 16 2018 .system_info
lrwxrwxrwx 1 root root 7 Nov 6 20:21 bin -> usr/bin
drwx------ 2 root root 4096 Nov 6 20:24 config
drwxr-xr-x 3 root root 4096 Nov 6 20:21 dev
drwxr-xr-x 53 root root 4096 Feb 7 03:33 etc
drwxr-xr-x 43 root root 4096 Feb 7 03:32 etc.defaults
drwxr-xr-x 2 root root 4096 Sep 5 06:32 initrd
lrwxrwxrwx 1 root root 7 Nov 6 20:21 lib -> usr/lib
lrwxrwxrwx 1 root root 9 Nov 6 20:21 lib32 -> usr/lib32
lrwxrwxrwx 1 root root 7 Nov 6 20:21 lib64 -> usr/lib
drwx------ 2 root root 4096 Sep 5 06:32 lost+found
drwxr-xr-x 2 root root 4096 Sep 5 06:32 mnt
drwx--x--x 3 root root 4096 Nov 6 20:25 opt
drwxr-xr-x 2 root root 4096 Sep 5 06:32 proc
drwx------ 5 root root 4096 Nov 16 15:34 root
drwxr-xr-x 7 root root 4096 Nov 6 20:21 run
lrwxrwxrwx 1 root root 8 Nov 6 20:21 sbin -> usr/sbin
-rw-r--r-- 1 root root 0 Feb 7 03:32 stopping
dr-xr-xr-x 2 root root 4096 Sep 5 06:32 sys
drwxrwxrwx 2 root root 4096 Feb 7 03:34 tmp
drwxr-xr-x 12 root root 4096 Jan 20 06:47 usr
drwxr-xr-x 17 root root 4096 Feb 7 03:33 var
drwxr-xr-x 12 root root 4096 Nov 6 20:22 var.defaults
drwxrwxrwx 2 root root 4096 Sep 5 06:32 volume1
drwxr-xr-x 4 root root 4096 Feb 3 12:18 volumeUSB1
var/log/ls-result.log 0000644 0000000 0000000 00000003245 14751277507 013605 0 ustar root root lrwxrwxrwx 1 root root 7 Sep 5 06:34 bin -> usr/bin
drwxr-xr-x 5 root root 12960 Feb 7 03:34 dev
drwxr-xr-x 7 root root 0 Sep 5 06:34 etc
lrwxrwxrwx 1 root root 3 Sep 5 06:34 etc.defaults -> etc
lrwxrwxrwx 1 root root 11 Jun 2 2023 init -> bin/busybox
drwxr-xr-x 24 root root 4096 Feb 7 03:34 juniorLogMnt
lrwxrwxrwx 1 root root 7 Sep 5 06:34 lib -> usr/lib
lrwxrwxrwx 1 root root 9 Sep 5 06:34 lib32 -> usr/lib32
lrwxrwxrwx 1 root root 7 Sep 5 06:34 lib64 -> usr/lib
lrwxrwxrwx 1 root root 11 Jun 2 2023 linuxrc -> bin/busybox
-rwxr-xr-x 1 root root 569 Jan 31 2024 linuxrc.syno
-rwxr-xr-x 1 root root 26214 Jan 31 2024 linuxrc.syno.impl
drwxr-xr-x 2 root root 0 Sep 5 06:34 mnt
dr-xr-xr-x 101 root root 0 Feb 7 2025 proc
drwxr-xr-x 2 root root 0 Feb 7 03:34 recovery_root_mount
drwx------ 2 root root 0 Sep 5 06:34 root
drwxr-xr-x 5 root root 0 Feb 7 03:34 run
lrwxrwxrwx 1 root root 8 Sep 5 06:34 sbin -> usr/sbin
dr-xr-xr-x 12 root root 0 Feb 7 03:34 sys
drwxrwxrwt 2 root root 0 Feb 7 03:34 tmp
drwxr-xr-x 2 root root 0 Feb 7 03:34 tmpData
drwxr-xr-x 2 root root 0 Feb 7 03:34 tmpRoot
drwxr-xr-x 9 root root 0 Sep 5 06:34 usr
drwxr-xr-x 10 root root 0 Sep 5 06:34 var
drwxrwxrwx 2 root root 0 Sep 5 06:34 volume1
var/log/check_rootfs_health.log 0000644 0000000 0000000 00000000000 14751277505 015631 0 ustar root root var/log/upgrade_sh.log 0000644 0000000 0000000 00000000136 14751277503 013764 0 ustar root root Begin upgrade procedure
Failed to found any patch
No upgrade file found
End upgrade procedure
var/log/messages 0000644 0000000 0000000 00000000000 14751277500 012655 0 ustar root root var/log/linuxrc.syno.log 0000644 0000000 0000000 00000002621 14751277507 014323 0 ustar root root START /linuxrc.syno.impl
Insert basic USB modules...
:: Loading module usb-common ... [ OK ]
:: Loading module usbcore ... [ OK ]
:: Loading module xhci-hcd ... [ OK ]
:: Loading module xhci-pci ... [ OK ]
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
Assemble args: -u b9aca514:547ea638:3017a5a8:c86610be /dev/sda1 /dev/sdb1
mdadm: /dev/md0 has been started with 2 drives.
Partition Version=8
Checking ext4 rootfs on /dev/md0
return value: 0
sda, part of md0, has obsolete partition layout 8.
Detected data partition on sda. Must not be fresh installation.
ForceNewestLayout: Skipped
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
Failed to found any patch
No upgrade file found
End upgrade procedure
============upgrade
------------bootup-smallupdate
mkdir: can't create directory '/tmpRoot/proc': File exists
mkdir: can't create directory '/tmpRoot/sys': File exists
mkdir: can't create directory '/tmpRoot/dev': File exists
Try bootup smallupdate
No patch exist. Skip Packed Bootup SmallUpdate
Sparse files don't exist. Skip Sparse Bootup SmallUpdate
Finished synoautonano
============bootup-smallupdate
Wait 2 seconds for synology manufactory device
Fri Feb 7 03:34:31 UTC 2025
/dev/md0 /tmpRoot ext4 rw,noatime,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
tmp/ 0001777 0000000 0000000 00000000000 14751277501 010372 5 ustar root root tmp/fsck.root.log 0000644 0000000 0000000 00000001616 14751277503 013006 0 ustar root root [2025-02-07T03:34:25+0000]
Checking ext4 rootfs on /dev/md0
e2fsck 1.44.1 (24-Mar-2018)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
46469 inodes used (29.86%, out of 155648)
680 non-contiguous files (1.5%)
25 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 42535/247/1
393173 blocks used (63.16%, out of 622544)
0 bad blocks
1 large file
36971 regular files
5438 directories
2 character device files
0 block device files
0 fifos
254 links
4047 symbolic links (3674 fast symbolic links)
2 sockets
------------
46714 files
return value: 0
tmp/.not.dualhead 0000644 0000000 0000000 00000000000 14751277501 012722 0 ustar root root etc/synoinfo.conf 0000755 0000000 0000000 00000020007 14666250356 013061 0 ustar root root AppleTalk="eth0"
BS_Thr_Enable="yes"
BS_Thr_Value="50"
HddEnableDynamicPower="yes"
addport="no"
allowanonymous="yes"
arp_ignore="yes"
auto_poweroff_timer="0"
autoblock_attempt_min="0"
autoblock_attempts="0"
autoblock_expriedday="0"
btrfs_default_compression="zstd"
buzzeroffcfg="0x00"
buzzeroffen="0x1f"
cache_max_total_size_gb="0"
codepage="enu"
company="synology"
company_title="Synology"
configured="no"
ddns_reclaim_interval_mins="3"
ddns_select=""
ddns_update="no"
defaultfs="btrfs"
defgroup="users"
defquota="5"
defright="writeable"
defshare="public"
disk_inode_warning_percent="0.05"
disk_swap="static"
diskcache="on"
dsmtimeout="15"
enableRCPower="no"
enable_fan_debug="0x0"
enable_syno_token="yes"
enable_zram="yes"
enableguest="no"
esata_disk_warning_percent="0.1"
esata_partition_warning_percent="0.1"
esataportcfg="0x4"
eth0_mtu="1500"
eth0_wol_options="d"
ew20_website_url="https://account.synology.com/"
frame_options_built_in_allow_url="gofile.me/,find.synology.com/"
frame_options_deny_url=""
group_thread_cnt="auto"
hostname="DiskStation"
hostname_alias="SynologyNAS"
internal_disk_without_led_mask="no"
internalportcfg="0x3"
iscsi_target_type="lio4x"
language="def"
mailfrom="Synology DiskStation"
maillang="enu"
manager="Synology DiskStation"
max_btrfs_snapshots="65536"
max_c2fs_num="10"
max_dr_replica="32"
max_iscsiluns="256"
max_iscsitrgs="128"
max_snapshot_per_lun="256"
max_snapshots_per_share="1024"
max_volumes="256"
maxaccounts="2048"
maxdisks="2"
maxgroups="256"
maxlanport="1"
maxlogsize="64"
maxprinters="2"
maxshares="256"
mem_max_mb="6144"
mem_min_mb="2048"
mfp_autotimer="60"
mfp_manualtimer="300"
min_free_kbytes=""
mount_efivarfs="no"
myds_region_api_base_url="https://account.synology.com/"
netbkp="yes"
ntpdate_period="daily"
ntpdate_run_client="yes"
ntpdate_run_server="no"
ntpdate_server="time.google.com"
ntpdate_server_backup=""
online_help_base_url="http://help.synology.com/"
os_name="DSM"
package_update_channel="beta"
php_openbasedir_customize="no"
pkg_source_trust_level="0"
pkg_term_version="0003"
pkgupdate_server="https://pkgupdate7.synology.com"
platform_name="apollolake"
portmap_admin="no"
portmap_ftp="no"
portmap_http="no"
portmap_http_add="no"
portmap_netbkp="no"
portmap_netbkp_encrypt="no"
printer_driver_host="https://global.download.synology.com/airprint/DSM7.2/latest"
product="DiskStation"
pswdprotect="no"
pushbrowser_server="https://notification.synology.com/web/"
pushservice_server="https://sns.synology.com/api/"
redirect_server="https://gofile.me/"
remain_life_mail_notify_thr_value="1"
remain_life_show_thr_value="5"
remain_life_thr_enable="no"
remain_life_thr_value="1"
retain_admin_pwd="no"
rss_server="http://update7.synology.com/autoupdate/genRSS.php"
rss_server_ssl="https://update7.synology.com/autoupdate/genRSS.php"
rss_server_v2="https://update7.synology.com/autoupdate/v2/getList"
runmediaservice="no"
runupnp="no"
s2s_task_max="8"
sata_deep_sleep_en="yes"
satadeepsleeptimer="1"
sb_month_left_thres_value="1"
sb_month_left_warn_enable="no"
sb_month_show_thres_value="3"
sdcard_partition_warning_percent="0.05"
sdcard_warning_percent="0.05"
sdcopy="no"
sdkversion="no"
security_version_server="https://update7.synology.com/securityVersion"
share_quota_warning_percent="0.95"
showdisktemperature="yes"
small_info_path="https://update7.synology.com/smallupdate"
smsinterval="1"
smsneedinterval="no"
smspass=""
smsphone1=""
smsphone2=""
smsport="80"
smssepchar="+"
smsserver="clickatell"
smsssl="yes"
smstemplate="https://api.clickatell.com/http/sendmsg?user=@@USER@@&password=@@PASS@@&api_id=3148203&to=@@PHONE@@&text=@@TEXT@@"
smstest="no"
smsuser=""
ss_cms="yes"
ss_sync_event_player="yes"
ss_vs="yes"
standby_force="yes"
standbytimer="20"
strong_password_enable="yes"
supplang="enu,cht,chs,krn,tha,ger,fre,ita,spn,jpn,dan,nor,sve,nld,rus,plk,ptb,ptg,hun,trk,csy"
supportMFP="yes"
supportMTU="yes"
supportNFS="yes"
supportNFSKerberos="yes"
supportTc="yes"
supportVLAN="yes"
support_aesni_intel="yes"
support_app_privilege="yes"
support_apparmor="yes"
support_audio="yes"
support_auto_poweron="yes"
support_auto_repair="no"
support_btrfs="yes"
support_buzzer="yes"
support_c2fs="yes"
support_cable_overview="no"
support_chassis_sn="no"
support_console_port="no"
support_directory_service="yes"
support_disk_compatibility="yes"
support_disk_hibernation="yes"
support_disk_latency_monitor="yes"
support_disk_msgr="yes"
support_disk_performance_test="yes"
support_disk_report="yes"
support_download="yes"
support_dr_replica="yes"
support_dr_snap="yes"
support_dsl_cmd="yes"
support_ez_internet="yes"
support_fan="yes"
support_fan_adjust_dual_mode="yes"
support_fast_repair="yes"
support_fti_offline_pack_upload="no"
support_fw_security="yes"
support_group="yes"
support_ha="no"
support_hfsplus_rw="yes"
support_hotspare="yes"
support_ihm="yes"
support_img_backupd="yes"
support_ipsec="yes"
support_iscsi_btrfs_lun="yes"
support_iscsi_lunbkp="yes"
support_iscsi_plugin="yes"
support_iscsi_target="yes"
support_iscsi_target_block="no"
support_kmip="no"
support_led_behavior_v2="yes"
support_led_brightness_adjustment="yes"
support_leds_lp3943="yes"
support_m2_pool="no"
support_mib="yes"
support_mib_adv_mode="yes"
support_mtd_serial="yes"
support_online_compr_switch="yes"
support_oob_ctl="no"
support_ovs="yes"
support_performance_event="yes"
support_postgresql_data_checksums="yes"
support_power_recovery="yes"
support_power_schedule="yes"
support_poweroff="yes"
support_printer="yes"
support_raid_dummy_read="no"
support_s2s="yes"
support_s2s_server="yes"
support_sct_cmd="yes"
support_share_encryption="yes"
support_share_quota="yes"
support_share_snapshot="yes"
support_share_user_quota="yes"
support_skip_copy="yes"
support_spectre_meltdown_mitigation="yes"
support_spectre_meltdown_mitigation_full="yes"
support_ssd_cache="no"
support_ssd_related_ui="yes"
support_ssd_trim="yes"
support_stgmgmt_task_queue="yes"
support_storage_mgr="yes"
support_syno_hybrid_raid="yes"
support_synoacl="yes"
support_synodrive_ability="no"
support_synodrive_rule="1"
support_synopkg="yes"
support_synorbd_vspace="yes"
support_sys_time="yes"
support_task_scheduler="yes"
support_timebkp_server="yes"
support_trim="yes"
support_tutorial="yes"
support_uasp="no"
support_upgrade_space_preserve="no"
support_usb_printer="yes"
support_vaai="yes"
support_volume_encryption="no"
support_watermark_adjustment="no"
support_wdda="no"
support_webapi_priority_level="yes"
support_webinstall="yes"
support_wimax="yes"
support_wireless="yes"
support_wireless_number="2"
support_wol="yes"
support_wol_but_not_enable_ui="no"
support_worm="no"
support_write_cache="no"
support_xa="no"
support_zram="yes"
supportdcacheui="yes"
supportddns="yes"
supportdomain="yes"
supportext4="yes"
supportfileindex="yes"
supportfilestation="yes"
supporthfsplus="yes"
supportitunes="yes"
supportldap="yes"
supportmediaservice="yes"
supportmemtest="yes"
supportmount="yes"
supportntfswrite="yes"
supportphoto="yes"
supportphotopersonal="yes"
supportquota="yes"
supportraid="yes"
supportraidcross="no"
supportrcpower="yes"
supportrsrcmon="yes"
supportsmart="yes"
supportsnapshot="yes"
supportssh="yes"
supportstartupd="yes"
supportsurveillance="yes"
supportsystemperature="yes"
supportsystempwarning="yes"
supporttrustdomain="yes"
supportuart2="yes"
supportups="yes"
supportvideostation="yes"
surveillance_camera_max="25"
syno_product="DSM"
synobios="apollolake"
syslogport="514"
systemfs="ext4"
timebkp_max_task="8"
timezone="Pacific"
token_invalid_referer="fbsharing,fbdownload"
token_valid_user_agent=""
unique="synology_apollolake_218+"
update_server="http://update7.synology.com/"
update_server_ssl="https://update7.synology.com/"
updateurl="http://www.synology.com/"
upgrade_pkg_dsm_notification="yes"
upnpdevicetype="DiskStation"
upnpfriendlyname="DiskStation Device"
upnpmanufacturerurl="http://www.synology.com/"
upnpmodeldescription="DiskStation UPnP Device"
upnpmodelname="DS218+"
upnpmodelurl=""
usb_disk_warning_percent="0.05"
usb_partition_warning_percent="0.05"
usbbkp="yes"
usbcopy="yes"
usbportcfg="0x70000"
use_reserved_more_gdt="no"
vender="Synology Inc."
vpn_conn_max="40"
vs_version="1.1"
win98autodisconnect="yes"
wins="none"
wol_enabled_options="g"
etc/VERSION 0000755 0000000 0000000 00000000512 14666250356 011415 0 ustar root root majorversion="7"
minorversion="2"
major="7"
minor="2"
micro="2"
buildphase="GM"
buildnumber="72806"
smallfixnumber="0"
nano="0"
base="72806"
productversion="7.2.2"
os_name="DSM"
builddate="2024/09/05"
buildtime="14:32:38"
unique="synology_apollolake_218+"
extractsize=900436
partitionversionlimit=0
syno_supported_hwrevision="r0"