File: //.log.junior/logs.tar.24
var/log/ 0000755 0000000 0000000 00000000000 14721762435 011140 5 ustar root root var/log/sn-result.log 0000644 0000000 0000000 00000000016 14721762435 013574 0 ustar root root 1990PCN844615
var/log/dmesg.log 0000644 0000000 0000000 00000126331 14721762435 012750 0 ustar root root [ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.302+ (root@build7) (gcc version 12.2.0 (GCC) ) #72806 SMP Thu Sep 5 13:42:01 CST 2024
[ 0.000000] Command line: root=/dev/md0 earlyprintk=apl console=ttyS2,115200n8 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 syno_hw_version=DS218+ vender_format_version=2 syno_hdd_detect=18,179,176,175 syno_hdd_enable=21,20,19,9 syno_usb_vbus_gpio=11@0000:00:15.0@1,10@0000:00:15.0@2,13@0000:00:15.0@3 sn=1990PCN844615 macs=001132b84c67
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000067c27fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067c28000-0x0000000067c28fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000067c29000-0x0000000067c42fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000067c43000-0x0000000067c7dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067c7e000-0x0000000068c7dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000068c7e000-0x000000007822efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007822f000-0x000000007aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d370afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x01ddc510-0x01ddc51f] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001ddc50f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001ddc510-0x0000000001ddc51f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001ddc520-0x000000000fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000012151000-0x0000000067c27fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067c28000-0x0000000067c28fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000067c29000-0x0000000067c42fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000067c43000-0x0000000067c7dfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067c7e000-0x0000000068c7dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000068c7e000-0x000000007822efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007822f000-0x000000007aebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d3709000-0x00000000d370afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001ffffffff] usable
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x7affe014 SMBIOS=0x78757000 SMBIOS 3.0=0x78755000
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] e820: update [mem 0x7b000000-0xffffffff] usable ==> reserved
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff88000007a000] 7a000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x37558000-0x37aa3fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007AFFE014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x000000007AFDA188 0000DC (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000007AFF5000 000114 (v06 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000007AFE6000 00772B (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000007AFAF000 000040
[ 0.000000] ACPI: FACS 0x000000007AFAF000 000040
[ 0.000000] ACPI: UEFI 0x000000007AFFD000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: BDAT 0x000000007AFFB000 000030 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000007AFFA000 000042 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFF9000 000554 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x000000007AFF8000 000034 (v03 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: PSDS 0x000000007AFF7000 00004D (v01 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000007AFF4000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000007AFF3000 00005C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000007AFF2000 000084 (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000007AFF1000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: NPKT 0x000000007AFF0000 000065 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x000000007AFEF000 000047 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WSMT 0x000000007AFEE000 000028 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE4000 00024A (v02 INSYDE UsbCTabl 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE3000 0000BC (v01 INSYDE Platform 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE2000 000541 (v02 INSYDE Cpu0Ist 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE1000 00072B (v02 INSYDE CpuSsdt 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFDE000 002760 (v02 INSYDE SaSsdt 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000007AFDD000 000034 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000007AFF6000 000104 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000007AFE5000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: NHLT 0x000000007AFDC000 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000085fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000012151000-0x0000000067c27fff]
[ 0.000000] node 0: [mem 0x0000000067c43000-0x0000000067c7dfff]
[ 0.000000] node 0: [mem 0x0000000068c7e000-0x000000007822efff]
[ 0.000000] node 0: [mem 0x000000007afff000-0x000000007affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ffffffff]
[ 0.000000] On node 0 totalpages: 1527880
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3972 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7428 pages used for memmap
[ 0.000000] DMA32 zone: 475332 pages, LIFO batch:31
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x01ddc000-0x01ddcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x01ddc000-0x01ddcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67c28000-0x67c28fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67c29000-0x67c42fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67c7e000-0x68c7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7822f000-0x7aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7aebf000-0x7afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7afbf000-0x7affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xd3708fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd3709000-0xd370afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd370b000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xd3708fff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 37 pages/cpu @ffff8801ffc00000 s111576 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s111576 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1503981
[ 0.000000] Kernel command line: root=/dev/md0 earlyprintk=apl console=ttyS2,115200n8 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 syno_hw_version=DS218+ vender_format_version=2 syno_hdd_detect=18,179,176,175 syno_hdd_enable=21,20,19,9 syno_usb_vbus_gpio=11@0000:00:15.0@1,10@0000:00:15.0@2,13@0000:00:15.0@3 sn=1990PCN844615 macs=001132b84c67
[ 0.000000] Internal HD num: 2
[ 0.000000] Internal netif num: 1
[ 0.000000] Support HDD Hotplug.
[ 0.000000] Sata Port Map: 21
[ 0.000000] Synology Hardware Version: DS218+
[ 0.000000] Vender format version: 2
[ 0.000000] SYNO GPIO hdd detect pin: 18 179 176 175
[ 0.000000] SYNO GPIO hdd enable pin: 21 20 19 9
[ 0.000000] USB Vbus GPIO Control:
[ 0.000000] Gpp#11 - Host: 0000:00:15.0 - Port:1 - Polarity: ACTIVE_HIGH
[ 0.000000] Gpp#10 - Host: 0000:00:15.0 - Port:2 - Polarity: ACTIVE_HIGH
[ 0.000000] Gpp#13 - Host: 0000:00:15.0 - Port:3 - Polarity: ACTIVE_HIGH
[ 0.000000] Serial Number: 1990PCN844615
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Memory: 5875500K/6111520K available (5719K kernel code, 866K rwdata, 1784K rodata, 924K init, 664K bss, 236020K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1996.712 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.42 BogoMIPS (lpj=1996712)
[ 0.011850] pid_max: default: 32768 minimum: 301
[ 0.017009] ACPI: Core revision 20150930
[ 0.031733] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.041380] Security Framework initialized
[ 0.045791] AppArmor: AppArmor initialized
[ 0.050358] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.058023] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.066472] Initializing cgroup subsys io
[ 0.070788] Initializing cgroup subsys memory
[ 0.075645] Initializing cgroup subsys devices
[ 0.080595] Initializing cgroup subsys freezer
[ 0.085596] CPU: Physical Processor ID: 0
[ 0.090015] CPU: Processor Core ID: 0
[ 0.106135] CPU0: Thermal monitoring enabled (TM1)
[ 0.111364] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.117339] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.126534] Freeing SMP alternatives memory: 24K
[ 0.138293] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.154814] TSC deadline timer enabled
[ 0.154824] smpboot: CPU0: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[ 0.165633] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.176880] ... version: 4
[ 0.181348] ... bit width: 48
[ 0.185913] ... generic registers: 4
[ 0.190381] ... value mask: 0000ffffffffffff
[ 0.196304] ... max period: 00007fffffffffff
[ 0.202230] ... fixed-purpose events: 3
[ 0.206698] ... event mask: 000000070000000f
[ 0.213184] x86: Booting SMP configuration:
[ 0.217667] .... node #0, CPUs: #1
[ 0.235867] x86: Booted up 1 node, 2 CPUs
[ 0.240343] smpboot: Total of 2 processors activated (7986.84 BogoMIPS)
[ 0.248575] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.257726] devtmpfs: initialized
[ 0.261511] PM: Registering ACPI NVS region [mem 0x67c28000-0x67c28fff] (4096 bytes)
[ 0.269966] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7afbefff] (1048576 bytes)
[ 0.278995] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.289784] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.296773] pinctrl core: initialized pinctrl subsystem
[ 0.302821] NET: Registered protocol family 16
[ 0.314636] cpuidle: using governor ladder
[ 0.323033] cpuidle: using governor menu
[ 0.327270] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.335670] ACPI: bus type PCI registered
[ 0.340234] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.350536] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.358114] PCI: Using configuration type 1 for base access
[ 0.369958] ACPI: Added _OSI(Module Device)
[ 0.374484] ACPI: Added _OSI(Processor Device)
[ 0.379396] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.384637] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.395695] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.407552] ACPI: Dynamic OEM Table Load:
[ 0.411839] ACPI: SSDT 0xFFFF8801F8B93A00 00015F (v02 PmRef ApIst 00003000 INTL 20130117)
[ 0.422255] ACPI: Interpreter enabled
[ 0.426168] ACPI: (supports S0 S4 S5)
[ 0.430228] ACPI: Using IOAPIC for interrupt routing
[ 0.435810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.454935] ACPI: Power Resource [FN00] (on)
[ 0.460393] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.467114] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.477039] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.484627] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.493759] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.505745] PCI host bridge to bus 0000:00
[ 0.510129] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.517022] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.524598] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.532176] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.539752] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.548106] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[ 0.556459] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[ 0.564812] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.573165] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.579294] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[ 0.579653] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[ 0.579678] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.579689] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.579698] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.580058] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380
[ 0.580098] pci 0000:00:0e.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[ 0.580128] pci 0000:00:0e.0: reg 0x20: [mem 0x91000000-0x910fffff 64bit]
[ 0.580176] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.580456] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.586639] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[ 0.586692] pci 0000:00:0f.0: reg 0x10: [mem 0x91318000-0x91318fff 64bit]
[ 0.586784] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.587073] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007
[ 0.587115] pci 0000:00:11.0: reg 0x10: [mem 0x91314000-0x91315fff 64bit]
[ 0.587134] pci 0000:00:11.0: reg 0x18: [mem 0x91319000-0x91319fff 64bit]
[ 0.587470] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[ 0.587496] pci 0000:00:12.0: reg 0x10: [mem 0x91316000-0x91317fff]
[ 0.587505] pci 0000:00:12.0: reg 0x14: [mem 0x9132e000-0x9132e0ff]
[ 0.587515] pci 0000:00:12.0: reg 0x18: [io 0x3080-0x3087]
[ 0.587523] pci 0000:00:12.0: reg 0x1c: [io 0x3088-0x308b]
[ 0.587532] pci 0000:00:12.0: reg 0x20: [io 0x3060-0x307f]
[ 0.587542] pci 0000:00:12.0: reg 0x24: [mem 0x9132c000-0x9132c7ff]
[ 0.587584] pci 0000:00:12.0: PME# supported from D3hot
[ 0.587847] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[ 0.587916] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.588136] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.594342] pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
[ 0.594414] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.594633] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.600842] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[ 0.600876] pci 0000:00:15.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[ 0.600937] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.601163] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.607371] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
[ 0.607405] pci 0000:00:16.0: reg 0x10: [mem 0x9131a000-0x9131afff 64bit]
[ 0.607420] pci 0000:00:16.0: reg 0x18: [mem 0x9131b000-0x9131bfff 64bit]
[ 0.607758] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
[ 0.607793] pci 0000:00:18.0: reg 0x10: [mem 0x9131c000-0x9131cfff 64bit]
[ 0.607808] pci 0000:00:18.0: reg 0x18: [mem 0x9131d000-0x9131dfff 64bit]
[ 0.608115] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000
[ 0.608148] pci 0000:00:18.1: reg 0x10: [mem 0x9131e000-0x9131efff 64bit]
[ 0.608162] pci 0000:00:18.1: reg 0x18: [mem 0x9131f000-0x9131ffff 64bit]
[ 0.608473] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000
[ 0.608505] pci 0000:00:18.2: reg 0x10: [mem 0x91320000-0x91320fff 64bit]
[ 0.608521] pci 0000:00:18.2: reg 0x18: [mem 0x91321000-0x91321fff 64bit]
[ 0.608818] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000
[ 0.608850] pci 0000:00:18.3: reg 0x10: [mem 0x91322000-0x91322fff 64bit]
[ 0.608866] pci 0000:00:18.3: reg 0x18: [mem 0x91323000-0x91323fff 64bit]
[ 0.609183] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
[ 0.609215] pci 0000:00:19.0: reg 0x10: [mem 0x91324000-0x91324fff 64bit]
[ 0.609230] pci 0000:00:19.0: reg 0x18: [mem 0x91325000-0x91325fff 64bit]
[ 0.609549] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
[ 0.609585] pci 0000:00:19.1: reg 0x10: [mem 0x91326000-0x91326fff 64bit]
[ 0.609600] pci 0000:00:19.1: reg 0x18: [mem 0x91327000-0x91327fff 64bit]
[ 0.609903] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
[ 0.609935] pci 0000:00:19.2: reg 0x10: [mem 0x91328000-0x91328fff 64bit]
[ 0.609949] pci 0000:00:19.2: reg 0x18: [mem 0x91329000-0x91329fff 64bit]
[ 0.610268] pci 0000:00:1a.0: [8086:5ac8] type 00 class 0x0c8000
[ 0.610315] pci 0000:00:1a.0: reg 0x10: [mem 0x9132a000-0x9132afff 64bit]
[ 0.610331] pci 0000:00:1a.0: reg 0x18: [mem 0x9132b000-0x9132bfff 64bit]
[ 0.610392] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.610676] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[ 0.611071] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[ 0.611134] pci 0000:00:1f.1: reg 0x10: [mem 0x9132d000-0x9132d0ff 64bit]
[ 0.611212] pci 0000:00:1f.1: reg 0x20: [io 0x3040-0x305f]
[ 0.611625] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
[ 0.611680] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x9121ffff]
[ 0.611707] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x201f]
[ 0.611722] pci 0000:01:00.0: reg 0x1c: [mem 0x91220000-0x91223fff]
[ 0.611834] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.611895] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.620054] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.625412] pci 0000:00:13.0: bridge window [io 0x2000-0x2fff]
[ 0.625417] pci 0000:00:13.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.625482] pci 0000:02:00.0: [1b4b:9170] type 00 class 0x010601
[ 0.625512] pci 0000:02:00.0: reg 0x10: [io 0x1018-0x101f]
[ 0.625522] pci 0000:02:00.0: reg 0x14: [io 0x1024-0x1027]
[ 0.625533] pci 0000:02:00.0: reg 0x18: [io 0x1010-0x1017]
[ 0.625543] pci 0000:02:00.0: reg 0x1c: [io 0x1020-0x1023]
[ 0.625554] pci 0000:02:00.0: reg 0x20: [io 0x1000-0x100f]
[ 0.625565] pci 0000:02:00.0: reg 0x24: [mem 0x91100000-0x911001ff]
[ 0.625575] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.625615] pci 0000:02:00.0: PME# supported from D3hot
[ 0.625649] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.633798] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.639153] pci 0000:00:14.0: bridge window [io 0x1000-0x1fff]
[ 0.639158] pci 0000:00:14.0: bridge window [mem 0x91100000-0x911fffff]
[ 0.639176] pci_bus 0000:00: on NUMA node 0
[ 0.639702] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.648335] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.657072] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.665810] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.674551] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.683291] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.692033] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.700774] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.711072] ACPI: Enabled 3 GPEs in block 00 to 7F
[ 0.716400] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.722532] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.731578] vgaarb: loaded
[ 0.734578] vgaarb: bridge control possible 0000:00:02.0
[ 0.740600] SCSI subsystem initialized
[ 0.744739] libata version 3.00 loaded.
[ 0.744795] pps_core: LinuxPPS API ver. 1 registered
[ 0.750222] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.760436] PTP clock support registered
[ 0.764895] EFI Variables Facility v0.08 2004-May-17
[ 0.798047] pstore: Registered efi as persistent store backend
[ 0.804407] PCI: Using ACPI for IRQ routing
[ 0.815890] PCI: pci_cache_line_size set to 64 bytes
[ 0.815998] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.816001] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[ 0.816003] e820: reserve RAM buffer [mem 0x01ddc510-0x03ffffff]
[ 0.816005] e820: reserve RAM buffer [mem 0x67c28000-0x67ffffff]
[ 0.816007] e820: reserve RAM buffer [mem 0x67c7e000-0x67ffffff]
[ 0.816009] e820: reserve RAM buffer [mem 0x7822f000-0x7bffffff]
[ 0.816011] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.816282] clocksource: Switched to clocksource hpet
[ 0.830822] AppArmor: AppArmor Filesystem Enabled
[ 0.835987] pnp: PnP ACPI init
[ 0.839461] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.845913] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.852517] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.859127] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.859554] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.867165] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.874544] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.881924] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.889322] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.896688] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.904070] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.911452] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.918833] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.926216] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.926547] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.926736] pnp: PnP ACPI: found 3 devices
[ 0.938045] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.947798] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.958890] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.964399] pci 0000:00:13.0: bridge window [io 0x2000-0x2fff]
[ 0.971198] pci 0000:00:13.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.978784] pci 0000:02:00.0: BAR 6: assigned [mem 0x91110000-0x9111ffff pref]
[ 0.986832] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.992367] pci 0000:00:14.0: bridge window [io 0x1000-0x1fff]
[ 0.999173] pci 0000:00:14.0: bridge window [mem 0x91100000-0x911fffff]
[ 1.006750] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.006753] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.006756] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.006759] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.006762] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window]
[ 1.006764] pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window]
[ 1.006767] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window]
[ 1.006770] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window]
[ 1.006772] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.006775] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[ 1.006778] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.006780] pci_bus 0000:02: resource 1 [mem 0x91100000-0x911fffff]
[ 1.006819] NET: Registered protocol family 2
[ 1.011664] IP idents hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.021121] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.029276] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.036982] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.044155] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.050979] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.058360] NET: Registered protocol family 1
[ 1.063075] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.064735] pci 0000:02:00.0: Apply mv9170 specific programming steps
[ 1.071765] PCI: CLS 64 bytes, default 64
[ 1.312885] Trying to unpack rootfs image as initramfs...
[ 3.006786] decompress cpio completed and skip redundant lzma
[ 3.014579] Freeing initrd memory: 5424K
[ 3.018810] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.025979] software IO TLB: mapped [mem 0x71eb4000-0x75eb4000] (64MB)
[ 3.034111] audit: initializing netlink subsys (disabled)
[ 3.039995] audit: type=2000 audit(1732795431.494:1): initialized
[ 3.047007] Initialise system trusted keyring
[ 3.120942] VFS: Disk quotas dquot_6.6.0
[ 3.125207] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.536279] Key type asymmetric registered
[ 3.540709] Asymmetric key parser 'x509' registered
[ 3.546204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.554390] io scheduler noop registered
[ 3.558755] io scheduler deadline registered
[ 3.563595] io scheduler cfq registered (default)
[ 3.569344] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[ 3.576953] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.584247] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
[ 3.584275] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
[ 3.592011] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.599300] pcie_pme 0000:00:14.0:pcie01: service driver pcie_pme loaded
[ 4.035496] tsc: Refined TSC clocksource calibration: 1996.793 MHz
[ 4.042237] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990b1d6704, max_idle_ns: 881590574189 ns
[ 4.976345] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.129614] clocksource: Switched to clocksource tsc
[ 5.198981] Linux agpgart interface v0.103
[ 5.231814] brd: module loaded
[ 5.249744] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.338442] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.409952] dw-apb-uart.1: ttyS0 at MMIO 0x9131c000 (irq = 44, base_baud = 115200) is a 16550A
[ 5.419433] console [ttyS2] enabled
[ 5.423332] bootconsole [earlyser0] disabled
[ 5.444231] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 5.446624] dw-apb-uart.2: ttyS1 at MMIO 0x9131e000 (irq = 45, base_baud = 115200) is a 16550A
[ 5.448068] console [ttyS2] disabled
[ 5.448279] dw-apb-uart.3: ttyS2 at MMIO 0x91320000 (irq = 6, base_baud = 115200) is a 16550A
[ 5.448296] console [ttyS2] enabled
[ 5.463474] dw-apb-uart.4: ttyS3 at MMIO 0x91322000 (irq = 47, base_baud = 115200) is a 16550A
[ 5.486680] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 5.503966] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 5.521883] idma64 idma64.7: Found Intel integrated DMA 64-bit
[ 5.540545] Loading iSCSI transport class v2.0-870.
[ 5.550713] ahci 0000:00:12.0: version 3.0
[ 5.550988] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.560048] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
[ 5.604569] scsi host0: ahci
[ 5.610269] scsi host1: ahci
[ 5.613613] ata1: SATA max UDMA/133 abar m2048@0x9132c000 port 0x9132c100 irq 367
[ 5.621993] ata2: SATA max UDMA/133 abar m2048@0x9132c000 port 0x9132c180 irq 367
[ 13.984836] ata1: link is slow to respond, please be patient (ready=0)
[ 18.790030] ata1: softreset failed (device not ready)
[ 18.795677] ata1: SRST fail, set srst fail flag
[ 19.417062] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 19.423973] ata1: link reset sucessfully clear error flags
[ 19.458075] ata1.00: disabling queued TRIM support
[ 19.458078] ata1.00: ATA-9: WDC WD4003FFBX-68MU3N0, 83.00A83, max UDMA/133
[ 19.465763] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 19.473737] ata1.00: SN:VBGGBSNF
[ 19.484829] ata1.00: disabling queued TRIM support
[ 19.484835] ata1.00: configured for UDMA/133
[ 19.489948] scsi 0:0:0:0: Direct-Access WDC WD4003FFBX-68MU3N0 0A83 PQ: 0 ANSI: 5
[ 19.500076] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 19.508736] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 19.519707] sd 0:0:0:0: [sda] Write Protect is off
[ 19.525073] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10
[ 19.528768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 19.750044] sda: sda1 sda2 sda5 sda6
[ 19.754709] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.855401] ata2: link is slow to respond, please be patient (ready=0)
[ 32.660593] ata2: softreset failed (device not ready)
[ 32.666240] ata2: SRST fail, set srst fail flag
[ 33.389630] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 33.396540] ata2: link reset sucessfully clear error flags
[ 33.430635] ata2.00: disabling queued TRIM support
[ 33.430638] ata2.00: ATA-9: WDC WD4003FFBX-68MU3N0, 83.00A83, max UDMA/133
[ 33.438323] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 33.446297] ata2.00: SN:VBGGBLDF
[ 33.457370] ata2.00: disabling queued TRIM support
[ 33.457376] ata2.00: configured for UDMA/133
[ 33.462490] scsi 1:0:0:0: Direct-Access WDC WD4003FFBX-68MU3N0 0A83 PQ: 0 ANSI: 5
[ 33.472626] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 33.472868] Change defer qc mode on external port for compatibility
[ 33.472893] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 33.472897] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 33.476194] scsi host2: ahci
[ 33.476304] ata3: SATA max UDMA/133 abar m512@0x91100000 port 0x91100100 irq 368
[ 33.517863] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 33.523765] sd 1:0:0:0: [sdb] Write Protect is off
[ 33.529124] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 10
[ 33.529157] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 33.708391] sdb: sdb1 sdb2 sdb5 sdb6
[ 33.712970] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 33.784656] ata3: SATA link down (SStatus 0 SControl 300)
[ 33.790703] ata3: Disk is present for SATA link down event
[ 33.809302] rtc-s35390a i2c-RTC35390:00: rtc core: registered rtc-s35390a as rtc0
[ 33.817715] i2c /dev entries driver
[ 33.847425] i801_smbus 0000:00:1f.1: SMBus using polling
[ 33.856738] md: raid1 personality registered for level 1
[ 33.862809] NET: Registered protocol family 17
[ 33.867801] Key type dns_resolver registered
[ 33.887210] mce: Using 7 MCE banks
[ 33.894729] registered taskstats version 1
[ 33.899326] Loading compiled-in untrusted X.509 certificates
[ 33.905661] Loading compiled-in X.509 certificates
[ 33.911061] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[ 33.923768] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[ 33.935080] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[ 33.948033] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[ 33.959031] page_owner is disabled
[ 33.962883] AppArmor: AppArmor sha1 policy hashing enabled
[ 33.969757] rtc-s35390a i2c-RTC35390:00: setting system clock to 2024-11-28 03:35:50 UTC (1732764950)
[ 33.981807] Freeing unused kernel memory: 924K
[ 33.986770] Write protecting the kernel read-only data: 8192k
[ 33.993428] Freeing unused kernel memory: 416K
[ 33.999258] Freeing unused kernel memory: 264K
[ 34.145650] random: nonblocking pool is initialized
[ 34.229504] ACPI: bus type USB registered
[ 34.234045] usbcore: registered new interface driver usbfs
[ 34.240194] usbcore: registered new interface driver hub
[ 34.246164] usbcore: registered new interface driver ethub
[ 34.252308] usbcore: registered new device driver usb
[ 34.294931] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 34.301371] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 34.510772] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109010
[ 34.520208] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 34.520569] hub 1-0:1.0: USB hub found
[ 34.525947] hub 1-0:1.0: 8 ports detected
[ 34.530794] host 0000:00:15.0 port 1 has Vbus GPIO#11 with polarity ACTIVE_HIGH
[ 34.539223] host 0000:00:15.0 port 2 has Vbus GPIO#10 with polarity ACTIVE_HIGH
[ 34.547484] host 0000:00:15.0 port 3 has Vbus GPIO#13 with polarity ACTIVE_HIGH
[ 34.556222] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 34.562069] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 34.570396] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 34.579732] hub 2-0:1.0: USB hub found
[ 34.585067] hub 2-0:1.0: 7 ports detected
[ 34.589912] host 0000:00:15.0 port 1 has Vbus GPIO#11 with polarity ACTIVE_HIGH
[ 34.598357] host 0000:00:15.0 port 2 has Vbus GPIO#10 with polarity ACTIVE_HIGH
[ 34.606621] host 0000:00:15.0 port 3 has Vbus GPIO#13 with polarity ACTIVE_HIGH
[ 34.642191] apollolake_synobios: loading out-of-tree module taints kernel.
[ 34.660855] synobios open /dev/ttyS1 success
[ 34.665804] correction with 0x00
[ 34.670416] 2024-11-28 3:35:51 UTC
[ 34.674217] synobios: load, major number 201
[ 34.678990] Brand: Synology
[ 34.682110] Model: DS-218+
[ 34.685130] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 34.694575] synobios cpu_arch proc entry initialized
[ 34.700126] synobios crypto_hw proc entry initialized
[ 34.705772] synobios syno_platform proc entry initialized
[ 34.721479] Module [apollolake_synobios] is removed.
[ 34.727169] synobios: unload
[ 34.834715] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 34.911134] md: md0 stopped.
[ 34.915637] md: bind<sdb1>
[ 34.918861] md: bind<sda1>
[ 34.922102] md/raid1:md0: active with 2 out of 2 mirrors
[ 34.931802] md0: detected capacity change from 0 to 2549940224
[ 34.976812] usb 1-3: not running at top speed
[ 35.351718] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 35.492826] usb 1-3: not running at top speed
[ 35.866733] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 36.007848] usb 1-3: not running at top speed
[ 36.381752] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 36.522856] usb 1-3: not running at top speed
[ 36.796091] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 36.824427] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 36.896803] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 36.908518] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 36.921908] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 37.042920] usb 1-3: not running at top speed
[ 37.100453] loop: module loaded
[ 37.416801] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 37.557904] usb 1-3: not running at top speed
[ 37.687804] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 41.407037] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 41.418785] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
var/log/ps-result.log 0000644 0000000 0000000 00000006431 14721762435 013605 0 ustar root root 1 root 4212 S /init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u8:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW [watchdog/0]
11 root 0 SW [watchdog/1]
12 root 0 SW [migration/1]
13 root 0 SW [ksoftirqd/1]
14 root 0 SW [kworker/1:0]
15 root 0 SW< [kworker/1:0H]
16 root 0 SW [kdevtmpfs]
17 root 0 SW< [netns]
18 root 0 SW [kworker/u8:1]
20 root 0 SW< [perf]
172 root 0 SW [khungtaskd]
173 root 0 SW< [writeback]
176 root 0 SWN [ksmd]
177 root 0 SW< [crypto]
178 root 0 SW< [kintegrityd]
179 root 0 SW< [bioset]
181 root 0 SW< [kblockd]
352 root 0 SW< [ata_sff]
363 root 0 SW< [md]
508 root 0 SW [kworker/0:1]
546 root 0 SW< [kswapd0:0]
561 root 0 SW [kworker/1:1]
615 root 0 SW< [vmstat]
616 root 0 SW [fsnotify_mark]
618 root 0 SW [kworker/u8:2]
3198 root 0 SW [kworker/1:2]
3302 root 0 SW< [bioset]
3315 root 0 SW< [bioset]
3324 root 0 SW< [bioset]
3328 root 0 SW< [bioset]
3330 root 0 SW< [bioset]
3331 root 0 SW< [bioset]
3332 root 0 SW< [bioset]
3333 root 0 SW< [bioset]
3334 root 0 SW< [bioset]
3335 root 0 SW< [bioset]
3336 root 0 SW< [bioset]
3337 root 0 SW< [bioset]
3338 root 0 SW< [bioset]
3339 root 0 SW< [bioset]
3340 root 0 SW< [bioset]
3341 root 0 SW< [bioset]
3659 root 0 SW [kworker/1:3]
3755 root 0 SW< [iscsi_eh]
3769 root 0 SW< [nvme]
3794 root 0 SW [scsi_eh_0]
3827 root 0 SW< [scsi_tmf_0]
3832 root 0 SW [scsi_eh_1]
3835 root 0 SW< [scsi_tmf_1]
3854 root 0 SW< [bioset]
3937 root 0 SW< [kworker/1:1H]
3938 root 0 SW< [bioset]
3943 root 0 SW [scsi_eh_2]
3946 root 0 SW< [scsi_tmf_2]
4175 root 0 SW< [deferwq]
4176 root 4212 S /bin/ash /linuxrc.syno
4183 root 0 Z [ash]
4184 root 0 Z [tee]
4510 root 0 SW [kworker/0:2]
4525 root 0 SW [kworker/0:3]
4656 root 0 SW< [kworker/0:1H]
4682 root 0 SW< [bioset]
4692 root 0 SW< [bioset]
4693 root 0 SW< [bioset]
4694 root 0 SW [md0_raid1]
4903 root 0 Z [linuxrc.syno.im]
4904 root 0 Z [tee]
5034 root 0 SW< [bioset]
5037 root 0 SW< [bioset]
5040 root 0 SW< [bioset]
5045 root 0 SW< [bioset]
5049 root 0 SW< [bioset]
5056 root 0 SW< [bioset]
5065 root 0 SW< [bioset]
5077 root 0 SW< [bioset]
5394 root 4212 S {backup_junior_l} /bin/sh /usr/syno/sbin/backup_juni
5428 root 0 SW< [ext4-group-desc]
5429 root 0 SW [jbd2/md0-8]
5430 root 0 SW< [ext4-rsv-conver]
5434 root 4212 R /bin/ps afx
var/log/ls-root-result.log 0000644 0000000 0000000 00000003571 14721762435 014564 0 ustar root root drwxr-xr-x 3 root root 4096 Nov 12 03:36 .log.junior
drwxr-xr-x 3 root root 4096 Nov 28 03:33 .old_patch_info
-rw------- 1 root root 1024 Nov 12 03:36 .rnd
drwxr-xr-x 4 root root 4096 Nov 6 20:23 .syno
drwxr-xr-x 2 root root 4096 Jun 16 2018 .system_info
lrwxrwxrwx 1 root root 7 Nov 6 20:21 bin -> usr/bin
drwx------ 2 root root 4096 Nov 6 20:24 config
drwxr-xr-x 3 root root 4096 Nov 6 20:21 dev
drwxr-xr-x 53 root root 4096 Nov 28 03:34 etc
drwxr-xr-x 43 root root 4096 Nov 28 03:34 etc.defaults
drwxr-xr-x 2 root root 4096 Sep 5 06:32 initrd
lrwxrwxrwx 1 root root 7 Nov 6 20:21 lib -> usr/lib
lrwxrwxrwx 1 root root 9 Nov 6 20:21 lib32 -> usr/lib32
lrwxrwxrwx 1 root root 7 Nov 6 20:21 lib64 -> usr/lib
drwx------ 2 root root 4096 Sep 5 06:32 lost+found
drwxr-xr-x 2 root root 4096 Sep 5 06:32 mnt
drwx--x--x 3 root root 4096 Nov 6 20:25 opt
drwxr-xr-x 2 root root 4096 Sep 5 06:32 proc
drwx------ 5 root root 4096 Nov 16 15:34 root
drwxr-xr-x 7 root root 4096 Nov 6 20:21 run
lrwxrwxrwx 1 root root 8 Nov 6 20:21 sbin -> usr/sbin
-rw-r--r-- 1 root root 0 Nov 28 03:34 stopping
dr-xr-xr-x 2 root root 4096 Sep 5 06:32 sys
drwxrwxrwx 2 root root 4096 Nov 28 03:35 tmp
drwxr-xr-x 12 root root 4096 Nov 15 03:54 usr
drwxr-xr-x 17 root root 4096 Nov 28 03:34 var
drwxr-xr-x 12 root root 4096 Nov 6 20:22 var.defaults
drwxrwxrwx 2 root root 4096 Sep 5 06:32 volume1
drwxr-xr-x 4 root root 4096 Nov 16 14:48 volumeUSB1
var/log/ls-result.log 0000644 0000000 0000000 00000003245 14721762435 013601 0 ustar root root lrwxrwxrwx 1 root root 7 Sep 5 06:34 bin -> usr/bin
drwxr-xr-x 5 root root 12960 Nov 28 03:35 dev
drwxr-xr-x 7 root root 0 Sep 5 06:34 etc
lrwxrwxrwx 1 root root 3 Sep 5 06:34 etc.defaults -> etc
lrwxrwxrwx 1 root root 11 Jun 2 2023 init -> bin/busybox
drwxr-xr-x 24 root root 4096 Nov 28 03:35 juniorLogMnt
lrwxrwxrwx 1 root root 7 Sep 5 06:34 lib -> usr/lib
lrwxrwxrwx 1 root root 9 Sep 5 06:34 lib32 -> usr/lib32
lrwxrwxrwx 1 root root 7 Sep 5 06:34 lib64 -> usr/lib
lrwxrwxrwx 1 root root 11 Jun 2 2023 linuxrc -> bin/busybox
-rwxr-xr-x 1 root root 569 Jan 31 2024 linuxrc.syno
-rwxr-xr-x 1 root root 26214 Jan 31 2024 linuxrc.syno.impl
drwxr-xr-x 2 root root 0 Sep 5 06:34 mnt
dr-xr-xr-x 101 root root 0 Nov 28 2024 proc
drwxr-xr-x 2 root root 0 Nov 28 03:35 recovery_root_mount
drwx------ 2 root root 0 Sep 5 06:34 root
drwxr-xr-x 5 root root 0 Nov 28 03:35 run
lrwxrwxrwx 1 root root 8 Sep 5 06:34 sbin -> usr/sbin
dr-xr-xr-x 12 root root 0 Nov 28 03:35 sys
drwxrwxrwt 2 root root 0 Nov 28 03:35 tmp
drwxr-xr-x 2 root root 0 Nov 28 03:35 tmpData
drwxr-xr-x 2 root root 0 Nov 28 03:35 tmpRoot
drwxr-xr-x 9 root root 0 Sep 5 06:34 usr
drwxr-xr-x 10 root root 0 Sep 5 06:34 var
drwxrwxrwx 2 root root 0 Sep 5 06:34 volume1
var/log/check_rootfs_health.log 0000644 0000000 0000000 00000000000 14721762433 015625 0 ustar root root var/log/upgrade_sh.log 0000644 0000000 0000000 00000000136 14721762431 013760 0 ustar root root Begin upgrade procedure
Failed to found any patch
No upgrade file found
End upgrade procedure
var/log/messages 0000644 0000000 0000000 00000000000 14721762426 012660 0 ustar root root var/log/linuxrc.syno.log 0000644 0000000 0000000 00000002621 14721762435 014317 0 ustar root root START /linuxrc.syno.impl
Insert basic USB modules...
:: Loading module usb-common ... [ OK ]
:: Loading module usbcore ... [ OK ]
:: Loading module xhci-hcd ... [ OK ]
:: Loading module xhci-pci ... [ OK ]
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
Assemble args: -u b9aca514:547ea638:3017a5a8:c86610be /dev/sda1 /dev/sdb1
mdadm: /dev/md0 has been started with 2 drives.
Partition Version=8
Checking ext4 rootfs on /dev/md0
return value: 0
sda, part of md0, has obsolete partition layout 8.
Detected data partition on sda. Must not be fresh installation.
ForceNewestLayout: Skipped
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
Failed to found any patch
No upgrade file found
End upgrade procedure
============upgrade
------------bootup-smallupdate
mkdir: can't create directory '/tmpRoot/proc': File exists
mkdir: can't create directory '/tmpRoot/sys': File exists
mkdir: can't create directory '/tmpRoot/dev': File exists
Try bootup smallupdate
No patch exist. Skip Packed Bootup SmallUpdate
Sparse files don't exist. Skip Sparse Bootup SmallUpdate
Finished synoautonano
============bootup-smallupdate
Wait 2 seconds for synology manufactory device
Thu Nov 28 03:35:57 UTC 2024
/dev/md0 /tmpRoot ext4 rw,noatime,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
tmp/ 0001777 0000000 0000000 00000000000 14721762427 010375 5 ustar root root tmp/fsck.root.log 0000644 0000000 0000000 00000001616 14721762431 013002 0 ustar root root [2024-11-28T03:35:51+0000]
Checking ext4 rootfs on /dev/md0
e2fsck 1.44.1 (24-Mar-2018)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
46257 inodes used (29.72%, out of 155648)
622 non-contiguous files (1.3%)
24 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 42353/220/1
394204 blocks used (63.32%, out of 622544)
0 bad blocks
1 large file
36789 regular files
5411 directories
2 character device files
0 block device files
0 fifos
254 links
4044 symbolic links (3671 fast symbolic links)
2 sockets
------------
46502 files
return value: 0
tmp/.not.dualhead 0000644 0000000 0000000 00000000000 14721762427 012725 0 ustar root root etc/synoinfo.conf 0000755 0000000 0000000 00000020007 14666250356 013061 0 ustar root root AppleTalk="eth0"
BS_Thr_Enable="yes"
BS_Thr_Value="50"
HddEnableDynamicPower="yes"
addport="no"
allowanonymous="yes"
arp_ignore="yes"
auto_poweroff_timer="0"
autoblock_attempt_min="0"
autoblock_attempts="0"
autoblock_expriedday="0"
btrfs_default_compression="zstd"
buzzeroffcfg="0x00"
buzzeroffen="0x1f"
cache_max_total_size_gb="0"
codepage="enu"
company="synology"
company_title="Synology"
configured="no"
ddns_reclaim_interval_mins="3"
ddns_select=""
ddns_update="no"
defaultfs="btrfs"
defgroup="users"
defquota="5"
defright="writeable"
defshare="public"
disk_inode_warning_percent="0.05"
disk_swap="static"
diskcache="on"
dsmtimeout="15"
enableRCPower="no"
enable_fan_debug="0x0"
enable_syno_token="yes"
enable_zram="yes"
enableguest="no"
esata_disk_warning_percent="0.1"
esata_partition_warning_percent="0.1"
esataportcfg="0x4"
eth0_mtu="1500"
eth0_wol_options="d"
ew20_website_url="https://account.synology.com/"
frame_options_built_in_allow_url="gofile.me/,find.synology.com/"
frame_options_deny_url=""
group_thread_cnt="auto"
hostname="DiskStation"
hostname_alias="SynologyNAS"
internal_disk_without_led_mask="no"
internalportcfg="0x3"
iscsi_target_type="lio4x"
language="def"
mailfrom="Synology DiskStation"
maillang="enu"
manager="Synology DiskStation"
max_btrfs_snapshots="65536"
max_c2fs_num="10"
max_dr_replica="32"
max_iscsiluns="256"
max_iscsitrgs="128"
max_snapshot_per_lun="256"
max_snapshots_per_share="1024"
max_volumes="256"
maxaccounts="2048"
maxdisks="2"
maxgroups="256"
maxlanport="1"
maxlogsize="64"
maxprinters="2"
maxshares="256"
mem_max_mb="6144"
mem_min_mb="2048"
mfp_autotimer="60"
mfp_manualtimer="300"
min_free_kbytes=""
mount_efivarfs="no"
myds_region_api_base_url="https://account.synology.com/"
netbkp="yes"
ntpdate_period="daily"
ntpdate_run_client="yes"
ntpdate_run_server="no"
ntpdate_server="time.google.com"
ntpdate_server_backup=""
online_help_base_url="http://help.synology.com/"
os_name="DSM"
package_update_channel="beta"
php_openbasedir_customize="no"
pkg_source_trust_level="0"
pkg_term_version="0003"
pkgupdate_server="https://pkgupdate7.synology.com"
platform_name="apollolake"
portmap_admin="no"
portmap_ftp="no"
portmap_http="no"
portmap_http_add="no"
portmap_netbkp="no"
portmap_netbkp_encrypt="no"
printer_driver_host="https://global.download.synology.com/airprint/DSM7.2/latest"
product="DiskStation"
pswdprotect="no"
pushbrowser_server="https://notification.synology.com/web/"
pushservice_server="https://sns.synology.com/api/"
redirect_server="https://gofile.me/"
remain_life_mail_notify_thr_value="1"
remain_life_show_thr_value="5"
remain_life_thr_enable="no"
remain_life_thr_value="1"
retain_admin_pwd="no"
rss_server="http://update7.synology.com/autoupdate/genRSS.php"
rss_server_ssl="https://update7.synology.com/autoupdate/genRSS.php"
rss_server_v2="https://update7.synology.com/autoupdate/v2/getList"
runmediaservice="no"
runupnp="no"
s2s_task_max="8"
sata_deep_sleep_en="yes"
satadeepsleeptimer="1"
sb_month_left_thres_value="1"
sb_month_left_warn_enable="no"
sb_month_show_thres_value="3"
sdcard_partition_warning_percent="0.05"
sdcard_warning_percent="0.05"
sdcopy="no"
sdkversion="no"
security_version_server="https://update7.synology.com/securityVersion"
share_quota_warning_percent="0.95"
showdisktemperature="yes"
small_info_path="https://update7.synology.com/smallupdate"
smsinterval="1"
smsneedinterval="no"
smspass=""
smsphone1=""
smsphone2=""
smsport="80"
smssepchar="+"
smsserver="clickatell"
smsssl="yes"
smstemplate="https://api.clickatell.com/http/sendmsg?user=@@USER@@&password=@@PASS@@&api_id=3148203&to=@@PHONE@@&text=@@TEXT@@"
smstest="no"
smsuser=""
ss_cms="yes"
ss_sync_event_player="yes"
ss_vs="yes"
standby_force="yes"
standbytimer="20"
strong_password_enable="yes"
supplang="enu,cht,chs,krn,tha,ger,fre,ita,spn,jpn,dan,nor,sve,nld,rus,plk,ptb,ptg,hun,trk,csy"
supportMFP="yes"
supportMTU="yes"
supportNFS="yes"
supportNFSKerberos="yes"
supportTc="yes"
supportVLAN="yes"
support_aesni_intel="yes"
support_app_privilege="yes"
support_apparmor="yes"
support_audio="yes"
support_auto_poweron="yes"
support_auto_repair="no"
support_btrfs="yes"
support_buzzer="yes"
support_c2fs="yes"
support_cable_overview="no"
support_chassis_sn="no"
support_console_port="no"
support_directory_service="yes"
support_disk_compatibility="yes"
support_disk_hibernation="yes"
support_disk_latency_monitor="yes"
support_disk_msgr="yes"
support_disk_performance_test="yes"
support_disk_report="yes"
support_download="yes"
support_dr_replica="yes"
support_dr_snap="yes"
support_dsl_cmd="yes"
support_ez_internet="yes"
support_fan="yes"
support_fan_adjust_dual_mode="yes"
support_fast_repair="yes"
support_fti_offline_pack_upload="no"
support_fw_security="yes"
support_group="yes"
support_ha="no"
support_hfsplus_rw="yes"
support_hotspare="yes"
support_ihm="yes"
support_img_backupd="yes"
support_ipsec="yes"
support_iscsi_btrfs_lun="yes"
support_iscsi_lunbkp="yes"
support_iscsi_plugin="yes"
support_iscsi_target="yes"
support_iscsi_target_block="no"
support_kmip="no"
support_led_behavior_v2="yes"
support_led_brightness_adjustment="yes"
support_leds_lp3943="yes"
support_m2_pool="no"
support_mib="yes"
support_mib_adv_mode="yes"
support_mtd_serial="yes"
support_online_compr_switch="yes"
support_oob_ctl="no"
support_ovs="yes"
support_performance_event="yes"
support_postgresql_data_checksums="yes"
support_power_recovery="yes"
support_power_schedule="yes"
support_poweroff="yes"
support_printer="yes"
support_raid_dummy_read="no"
support_s2s="yes"
support_s2s_server="yes"
support_sct_cmd="yes"
support_share_encryption="yes"
support_share_quota="yes"
support_share_snapshot="yes"
support_share_user_quota="yes"
support_skip_copy="yes"
support_spectre_meltdown_mitigation="yes"
support_spectre_meltdown_mitigation_full="yes"
support_ssd_cache="no"
support_ssd_related_ui="yes"
support_ssd_trim="yes"
support_stgmgmt_task_queue="yes"
support_storage_mgr="yes"
support_syno_hybrid_raid="yes"
support_synoacl="yes"
support_synodrive_ability="no"
support_synodrive_rule="1"
support_synopkg="yes"
support_synorbd_vspace="yes"
support_sys_time="yes"
support_task_scheduler="yes"
support_timebkp_server="yes"
support_trim="yes"
support_tutorial="yes"
support_uasp="no"
support_upgrade_space_preserve="no"
support_usb_printer="yes"
support_vaai="yes"
support_volume_encryption="no"
support_watermark_adjustment="no"
support_wdda="no"
support_webapi_priority_level="yes"
support_webinstall="yes"
support_wimax="yes"
support_wireless="yes"
support_wireless_number="2"
support_wol="yes"
support_wol_but_not_enable_ui="no"
support_worm="no"
support_write_cache="no"
support_xa="no"
support_zram="yes"
supportdcacheui="yes"
supportddns="yes"
supportdomain="yes"
supportext4="yes"
supportfileindex="yes"
supportfilestation="yes"
supporthfsplus="yes"
supportitunes="yes"
supportldap="yes"
supportmediaservice="yes"
supportmemtest="yes"
supportmount="yes"
supportntfswrite="yes"
supportphoto="yes"
supportphotopersonal="yes"
supportquota="yes"
supportraid="yes"
supportraidcross="no"
supportrcpower="yes"
supportrsrcmon="yes"
supportsmart="yes"
supportsnapshot="yes"
supportssh="yes"
supportstartupd="yes"
supportsurveillance="yes"
supportsystemperature="yes"
supportsystempwarning="yes"
supporttrustdomain="yes"
supportuart2="yes"
supportups="yes"
supportvideostation="yes"
surveillance_camera_max="25"
syno_product="DSM"
synobios="apollolake"
syslogport="514"
systemfs="ext4"
timebkp_max_task="8"
timezone="Pacific"
token_invalid_referer="fbsharing,fbdownload"
token_valid_user_agent=""
unique="synology_apollolake_218+"
update_server="http://update7.synology.com/"
update_server_ssl="https://update7.synology.com/"
updateurl="http://www.synology.com/"
upgrade_pkg_dsm_notification="yes"
upnpdevicetype="DiskStation"
upnpfriendlyname="DiskStation Device"
upnpmanufacturerurl="http://www.synology.com/"
upnpmodeldescription="DiskStation UPnP Device"
upnpmodelname="DS218+"
upnpmodelurl=""
usb_disk_warning_percent="0.05"
usb_partition_warning_percent="0.05"
usbbkp="yes"
usbcopy="yes"
usbportcfg="0x70000"
use_reserved_more_gdt="no"
vender="Synology Inc."
vpn_conn_max="40"
vs_version="1.1"
win98autodisconnect="yes"
wins="none"
wol_enabled_options="g"
etc/VERSION 0000755 0000000 0000000 00000000512 14666250356 011415 0 ustar root root majorversion="7"
minorversion="2"
major="7"
minor="2"
micro="2"
buildphase="GM"
buildnumber="72806"
smallfixnumber="0"
nano="0"
base="72806"
productversion="7.2.2"
os_name="DSM"
builddate="2024/09/05"
buildtime="14:32:38"
unique="synology_apollolake_218+"
extractsize=900436
partitionversionlimit=0
syno_supported_hwrevision="r0"